On 10/30/2010 11:34 PM, Larry wrote:
> I am looking for suggestions regarding my Clipperton-L. The basic problem is
> that there is
> no output. No apparent plate current.
>
Check the coax between the tank and the TR relay. Back "in the days" I
think that was the most often encountered problem.
Do you still have bias?
Those are the two that come to mind.
73
Roger (K8RI)
> I did several things:
>
> 1. I replaced the power supply board which seems to be working as the meter
> shows about
> 2500V (I don't have an HV probe to confirm independently that there is 2500V).
> 2. I had to fix the parasitic suppressors so I put in an AL572 RFC and
> suppressor board and
> increased the bypass cap to 0.001.
> 3. I changed the plate blocking cap to 2000pf (from 500pf) and changed a
> couple of doorknobs
> for 160. The no output has been checked only on 20 and 15 so far.
> 4. I changed the filament RFC to an RF Parts RFCFIL30.
>
> Some other facts:
>
> 1. The filaments are lit.
> 2. The meter shows what I recall as roughly the correct plate voltage.
> 3. Using an ohmmeter there is continuity from the PS HV pad to the plate
> connectors.
> 4. There is no plate current that I can see. Although, I once saw the plate
> current go to about
> 350mA and still no output.
> 5. Several years ago I added a tuned input board and there is continuity from
> the LVDC pad to
> input board and the bandswitch (unchanged in current mod but changed with the
> input board)
> still works correctly.
> 6. There is continuity from the plate to plate blocking capacitor and
> continuity from the "other"
> side of the plate blocking capacitor to the plate tuning capacitor.
> 7. I rechecked the connections and still think everything is correct.
> 8. No arcs, blown fuses, etc.
>
> I have obviously overlooked something. Suggestions?
>
> 73, Larry W6NWS
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|