I would first call the power company and have them check with their meter.
If it really is high demand it be reduced to 125V or less.
Mine is now a comfortable 119V but I still use bucking transformers for the
boatanchors. Light bulbs havent failed since.
Carl
KM1H
----- Original Message -----
From: "Gary McAdams" <g.m.mcadams@comcast.net>
To: <amps@contesting.com>
Sent: Sunday, November 14, 2010 8:47 AM
Subject: [Amps] AL-82 Blowing fuses on startup
> Hello Group.
>
> Short question: I have an AL-82 that has started to blow a fuse on
> start-up.
>
> It doesn't do it every time, and when the fuse is replaced the unit
> starts OK and runs all day w/o problems. This all started when I
> re-arranged the shack. The unit is about two years old.
>
> The first time it happened, I checked the AC input at ~248 volts. Is
> this too high?
>
> So, any ideas on what to look for or where to start? As I sit here the
> amp is on and running, but yesterday I had to replace a fuse to get it
> started. This is only twice that I've had to replace the fuse, but
> that's two times too many.
>
> 73 Gary WG7X
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|