Re: [Amps] AL-82a/80A Problem

[john.brewer@us.schneider-electric.com]

Yes, probably the contacts on the 160M position of the bandswitch  are now 
smoked

The good news is that a new switch is available from Ameritron

The bad news is it'll cost you ~70$

The best news is, you can refit the existing switch with  a new set of contacts 
(if it's the
stationary contacts) without removing it from the amp, in about an hour, using 
contacts from a
junk box switch ,  #0 hardware and some swearing.

John K5MO

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps