On 4/13/2011 2:46 AM, Stein Roar Brobakken wrote:
> Hi
> Thanks for answer.
>
> Yes, I got the manuals. But the FT2000 manual don't explain what is used for
> other amps and difference between BAND DATA connector or the RCA connector
> board at the rear of Yaesu FT-2000, I have never touched a Yaesu. Hi hi
Doesn't the FT2000 use a standard size DIN? We used the pin outs on the
standard DIN and then traced them to the standard DIN on the FL-1.5Kfx.
From there we worked backwards to the mini DIN on the 897D. I
managed to confuse myself a number of times while attempting that. <:-))
IOW we used the 2000, 897D and FL-1.5Kfx manuals to finally figure out
what wire went where.
I hope to get an FTDX5000MP at Dayton.
73
Roger (K8RI)
> Also got direct mail from W4TV Joe which confirmed what I had "mixed"
> together of those manuals.
>
> 73s Rag LA6FJA
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|