i do have some on each end of the fillimate chokes but thats about it. the
sound WAS comming from the cavity its self. had major meltdown. lost many
components. have most of it fixed now but tube is a goner
i do have some photos on my web site at kc5gtt.com. thanks again to the
list.
Carey, kc5gtt
----- Original Message -----
From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
To: "Carey Lockhart, KC5GTT" <kc5gtt@gmail.com>
Sent: Sunday, May 15, 2011 1:45 PM
Subject: RE: [Amps] gs35b 144mhz
I see no problem as long as it is your own voice you are hearing. Other wise
contact SYFY channel.
Those are very high plate currents. Especially the no-load one and for
the output power.
Is that normal operation or your abnormal operation.
Do you have any ceramic disc capacitors anywhere in the ckt for bypassing?
Sometimes they can speak to you.
73
Bill wa4lav
________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
Carey Lockhart, KC5GTT [kc5gtt@gmail.com]
Sent: Monday, March 14, 2011 7:22 PM
To: amps@contesting.com
Subject: [Amps] gs35b 144mhz
Hello all,
i built a yu1aw 2 meter gs-35 amplifier about 8 months ago. been working
great. just recently i can here my voice coming from the cavity. also the
tube seems to be glowing a much brighter blue than before. with the lights
out i can not see any arcing. the amp is running the following
plate voltage 4100 no load
plate voltage 4600 full load
plate current 1.0a full load
bias -30v
output 1450 on diawa cn801hp
any ideas would be appreciated.
Carey, kc5gtt
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|