Amps
[Top] [All Lists]

Re: [Amps] Should a blower run after amp shutdown?

To: amps@contesting.com
Subject: Re: [Amps] Should a blower run after amp shutdown?
From: "Roger (sub1)" <sub1@rogerhalstead.com>
Date: Fri, 03 Jun 2011 13:49:18 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
On 6/3/2011 8:25 AM, John G3UUT wrote:
> Another caution, this time about constant voltage transformers.  I had
> one of these and tried to use it to stabilise the mains to a signal
> generator to improve drift.  It sort of worked but the main problem with
> it was that it distorted the mains waveform quite badly, sufficiently so
> that a normal moving coil meter read very inaccurately.  I'm not sure if
> all constant voltage transformers have this problem but some certainly
> do so if you want to set the filament to a particular voltage make sure
> you use a true RMS reading meter.

All the ones I have experience with work that way.  I think I may still 
have one that is 750VA or maybe 1KVA. Wave form is really ratty which is 
how they control the RMS voltage.  We used them on the input to the 
double walled calibration screen room where you'd think a pure sine wave 
would be needed.

73

Roger (K8RI)



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>