Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] 4/1000a

from [Allan Greening] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] 4/1000a
From: "Allan Greening" <vk3pa@vk3pa.com>
Date: Mon, 4 Jul 2011 21:17:38 -0000
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
When running a 4/1000a in class "C" -200volts,(CW  AMP ONLY HI) wot cut of
BIAS VOLTAGE should I use? When in rx mode..
Norm when in AB2 -75VOLTS WE USE -180 FER CUT OFF!!. Or where do I use "EBS"
in grid or cathode ?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] 4/1000a, Allan Greening <=
Previous by Date:  [Amps] High Voltage Engineering, John Lyles
Next by Date:  Re: [Amps] High SWR, Dr. David Kirkby
Previous by Thread:  [Amps] High Voltage Engineering, John Lyles
Next by Thread:  Re: [Amps] High SWR, Dr. David Kirkby
Indexes:  [Date] [Thread] [Top] [All Lists]