Sorry but I put most so called Pin 1 problems in the same category as
mysterious parasitics requiring nichrome to cure.
RF on the coax outer shield caused problems as far back as vacuum tube days
and the ferrite has worked ever since its use was discovered as the first
and usually the only step needed.
Ive yet to even bother to look for a Pin 1 problem as RF in the house simply
does not exist to a level to cause a problem with radio, computer or audio
equipment. IMO Pin 1 is overblown (as are parasitics by another individual)
and I would expect any of the radio manufacturers to already be aware of it.
----- Original Message -----
From: "Jim Brown" <firstname.lastname@example.org>
Sent: Wednesday, September 14, 2011 11:25 AM
Subject: Re: [Amps] RF on audio using 374A
> On 9/14/2011 6:19 AM, Carl wrote:
>> Glad to hear it wasnt a Pin 1 problem Roger (-;
> Ah, but it most likely WAS a Pin One Problem, and the choke to keep RF
> off the line was the easiest fix. Think, Carl, about HOW the RF on the
> coax shield gets into the equipment!
> The way equipment is built makes Pin One Problems more likely, AND very
> difficult to fix without a complete rebuild. So the easiest solution is
> to kill the current that excites the Pin One Problem, which is what
> Roger did.
> 73, Jim K9YC
> Amps mailing list
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3896 - Release Date: 09/14/11
Amps mailing list