They are good for high current, but not so much for high voltage. I replaced
one in a
friend's 4-1000A amplifier after it was damaged by corona-induced arcing. The
running at 3600v.
On 2/6/2012 5:41 AM, Carl wrote:
> Its fine at that low power, just give it a good dishwasher cleaning to get
> rid of 70 years of gunk on the ceramic.
> ----- Original Message -----
> From: "John Finner"<email@example.com>
> Sent: Sunday, February 05, 2012 10:24 PM
> Subject: [Amps] BC-375E Switch
>> How stout is the BC-375E switch? Is it suitable for band switch use in my
>> 3 4CX300A tube amp at 1800 watts input?
>> John WA4EPI
Amps mailing list