Dear friend Hal
I didn't respond you before for problems with the HDD of my old computer.
I made all that you told me and the continuous problem.
All the antennas, coax and connectors are in good state and very connected.
I think that the problem this in the Lineal amp but also change those
condensers of each band in the input coil and all continuous one equally.
Please help me to look for the cause maybe your you have another idea of the
----- Original Message -----
From: Hal W5GHZ
To: Eduardo Somoano C
Sent: Tuesday, January 24, 2012 3:59 PM
Subject: Re: [Amps] Mysterious problem with my FL-2100b
Try replacing the amplifier with a dummy load. Check for good SWR. This
will confirm that the coax and connectors going from the HF rig to the
amplifier are not causing the problem. Then connect the antenna to the coax
that goes to the amplifier. You should sitll have good SWR. This would
confirm a problem with the amplifier or the antenna.
Let us know how it works out.
From: Eduardo Somoano C <email@example.com>
To: Lista Antenas <Antennas@mailman.qth.net>; firstname.lastname@example.org
Sent: Tuesday, January 24, 2012 6:40 AM
Subject: [Amps] Mysterious problem with my FL-2100b
I have a mysterious problem with my old Lineal FL2100b.
It happens that I am not able to couple the HF equipament with the lineal
one, I install among
the HF and the lineal one a meter R.O.E and in all the bands the SWR
it is high, only in 40mtrs the SWR is 1:1 in all the other ones
bands this between 4 and 5.
I adjust each input coil explains the manual, disconnecting
the high voltage and adjusting input coil to minimum SWR but I don't achieve
that it lowers anything.
Also change the condensers and everything continues equally.
Wanted that somebody helps me to solve the problem because not
encounter which is the cause of because there is not joining among
the HF and the lineal one.
With a lot of interest I wait your answer.
A million thank you in advance.
Amps mailing list
Yaesu mailing list