Please, how do you get to the archives?
Steve KA2KON
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "Robert Groh" <rgroh@swbell.net>; <amps@contesting.com>
Sent: Sunday, March 18, 2012 1:02 PM
Subject: Re: [Amps] April QST article on RF power tube test stand
> Ive outlined the steps several times on here under gettering, see the
> archives.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: Robert Groh
> To: Carl ; amps@contesting.com
> Sent: Sunday, March 18, 2012 11:38 AM
> Subject: Re: [Amps] April QST article on RF power tube test stand
>
>
> Carl,
>
> I would be very interested in your ideas on what should be added. My
> opinion was also that it was a bit limited (keeping in mind my absolute
> beginner status in high power amps) and could stand a few additions such
> as easy provision for running lower plate voltage for gettering, some way
> to test emission, etc. Also still needs some way to hipot the tube but I
> guess that is best handled with a separate hipot test setup.
>
> In any event, I would be most eager to hear your ideas.
>
> 73
> Bob, WA2CKY
>
>
>
>
> ------------------------------------------------------------------------------
> From: Carl <km1h@jeremy.mv.com>
> To: Rob Atkinson <ranchorobbo@gmail.com>; amps@contesting.com
> Sent: Sun, March 18, 2012 10:30:24 AM
> Subject: Re: [Amps] April QST article on RF power tube test stand
>
> Its a mostly waste of time as built. A little more work and it could be
> useful to do emissions tests as well as proper (safe) gettering.
>
> Carl
> KM1H
>
>
>
> ------------------------------------------------------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4878 - Release Date: 03/18/12
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|