Rob,
In this particular case, the manufacturer recommends adding a fan for
high duty cycle modes.
Your point is well taken, though. More pressure would help. Assuming the
flange is a standard size, a larger blower could be mounted with maybe
only one component move.
73,
Jim N7CXI
On 3/30/2012 6:50 AM, Rob Atkinson wrote:
> Before everyone goes crazy with adding fans, a few things to keep in mind:
>
> An added fan if not done right can actually disrupt air flow and make
> things worse; not better.
> An added fan can push or pull air on the stock fan and stress it.
>
> The best bet is to simply pull the stock fan and replace it with an
> identical unit in terms of its size but one that has a higher CFM
> spec.
>
>
> 73
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|