Amps
[Top] [All Lists]

Re: [Amps] SWR increase on SB-220 input - my face is red

To: amps@contesting.com
Subject: Re: [Amps] SWR increase on SB-220 input - my face is red
From: Vic K2VCO <k2vco.vic@gmail.com>
Date: Tue, 01 May 2012 16:53:34 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I would also replace the springs that clamp the filament pins. The heat weakens 
them and 
then it's a vicious cycle.

On 5/1/2012 3:03 PM, Carl wrote:
> I believe Ive mentioned many times that operating WARC is best done in the
> CW position with that amp and around 750-800W. The fan should also be kept
> clean as well as the motor cleaned and lubed.
>
> Clean any blackening off the socket connections.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Pete Smith N4ZR"<n4zr@contesting.com>
> To:<Amps@contesting.com>
> Sent: Tuesday, May 01, 2012 5:37 PM
> Subject: Re: [Amps] SWR increase on SB-220 input - my face is red
>
>
>> Took a look inside the top of the SB-220, and sure enough - I've melted
>> the filament out of the pins on the left-hand 3-500.  No wonder the
>> input SWR is off...
>>
>> 73, Pete N4ZR
>> The World Contest Station Database, updated daily at
>> www.conteststations.com
>> The Reverse Beacon Network at http://reversebeacon.net, blog at
>> reversebeacon.blogspot.com,
>> spots at telnet.reversebeacon.net, port 7000 and
>> arcluster.reversebeacon.net, port 7000
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1424 / Virus Database: 2411/4969 - Release Date: 04/30/12
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>