Ask after you have quieted or replaced the switcher
Carl
KM1H
----- Original Message -----
From: "Bruce Osterberg" <n9bx@mchsi.com>
To: <Amps@contesting.com>
Sent: Saturday, August 25, 2012 2:33 PM
Subject: [Amps] Amplifier Fans:
>
> Hello: I have Built a W6PO amplifier in a 30 Inch rack cabinet, along
> with it's power supply,(pictures available upon request.) But I thought
> I would add some internal fans on the inside to help cool the
> transformer and exhaust a bit more air. Well that turned out OK except
> for the Noise, (electrical that the Fans Produce.)
>
> With out the Fans on the noise level on the K3 is right at S1 all the
> time. Once the Fans are on it goes up to S5 and Stays there. Mind you
> these are cheap Ham fest fans, but I don't know if adding anything to
> them would cut down on the Electrical Noise Generated. But then as I
> think of it I may have a Problem with the Switching Power supply from
> China that I am using to provide power to the Fans. That's easier to
> check. But if it's the Fans, is there a solution to this delima?
>
> 73 Bruce N9BX
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5223 - Release Date: 08/25/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|