Amps
[Top] [All Lists]

Re: [Amps] Using old amps on WARC query

To: "Joe Subich, W4TV" <lists@subich.com>, <amps@contesting.com>
Subject: Re: [Amps] Using old amps on WARC query
From: "Carl" <km1h@jeremy.mv.com>
Date: Sun, 30 Jun 2013 12:59:33 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I have a mid production 76PA 3 holer that needed a change. Havent seen any with a later choke which may have been from a 78 sold later as a retrofit.

Carl
KM1H


----- Original Message ----- From: "Joe Subich, W4TV" <lists@subich.com>
To: <amps@contesting.com>
Sent: Sunday, June 30, 2013 10:45 AM
Subject: Re: [Amps] Using old amps on WARC query



I believe the early PA76 series amps *all* had plate chokes resonant
at 25 MHz and will not work on 12 meters.  It's been a long time since
I last looked at one.

73,

   ... Joe, W4TV


Please anyone can tell me the factors to consider, including burning
tank components, when operating old linear amplifiers on the WARC
bands, especially 12 meters.

Alpha 76 PAC meaning the 3 tube version.
TenTec Titan One
Dentron DTR-2000
ICOM IC-2KL

All these amps have factory-type conversions to TEN meters already
done. The Alpha has the swamping input taken out.  Other than that,
all amps are stock.

Thanks for all specific info... 73,

Charles Harpole
k4vud@hotmail.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3204/5951 - Release Date: 06/30/13


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>