Amps
[Top] [All Lists]

Re: [Amps] Autek WM-1 Schematic or Help

To: amps@contesting.com
Subject: Re: [Amps] Autek WM-1 Schematic or Help
From: Jim W7RY <w7ry@centurytel.net>
Reply-to: w7ry@centurytel.net
Date: Sun, 10 Nov 2013 17:52:52 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Thanks all for sending pictures and other stuff!

Got it all back to working and calibrated.
73
Jim W7RY


On 11/8/2013 9:36 PM, Jim W7RY wrote:
BTW the manual has a bit of a schematic, but the choke is not shown.

Thanks
73
Jim W7RY

On 11/8/2013 9:24 PM, Jim W7RY wrote:
I have a problem with an Autek WM1 measring the output of my amplifier. :)

Does anyone have a schematic for the Autek WM-1? A Google search found nothing.

Mine looks like it has a wiring error. The center tap of the sens transformer is not hooked to anything.. Also there is a small choke on the output connector, then that goes to 2ea 10 PF caps in series, then to the board. The small choke is smoked/burned.

Any idea what the value of the choke is? Anyone have a picture of the internal of the sensor module?

Thanks
73
Jim W7RY

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>