Notice that the Alpha 76a warns to put no more than 100 watts thru it on stand
by.
Charles Harpole
k4vud@hotmail.com
> Date: Sun, 10 Nov 2013 22:05:46 -0500
> From: ka4inm@gmail.com
> To: amps@contesting.com
> Subject: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and
> work at 1, 000 Watts as log as the load is good..
>
> Hi Bill WB6RFW:
>
> <<
> Now that I'm in the middle of doing a QSK mod to the Henry 2KD-4 ... I'm
> looking at the BNC input connector to the amp. It occurs to me that if I
> use my FT-2000D barefoot through the amp I may be pushing the BNC pretty
> hard at 200W. I can't think of a time I've ever put that much power
> through a BNC. There's also that piece of RG-58U in there. I guess I've
> put 200W pulse from a transponder through one but it's pretty low duty
> cycle.
>
> Maybe I shouldn't worry so much ...
> >>
> --
> Ron KA4INM - Youvan's corollary:
> Every action results in unwanted side effects.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|