Re: [Amps] MOVs

To:	amps@contesting.com
Subject:	Re: [Amps] MOVs
From:	Jim Brown <jim@audiosystemsgroup.com>
Reply-to:	jim@audiosystemsgroup.com
Date:	Thu, 23 Jan 2014 22:31:53 -0800
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

On 1/23/2014 7:18 AM, Paul Baldock wrote:

If the amp is running off 240V where in the USA this is symmetricalabout ground and then the MOV is placed between the two phases, itseems to me that there would not be a surge current to ground.

Right.  The problem comes when you take the MOV to the ground.

73, Jim K9YC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] MOVs, (continued) Re: [Amps] MOVs, Jim Brown Re: [Amps] MOVs, Jim W7RY Re: [Amps] MOVs, Jim Brown Re: [Amps] MOVs, Paul Baldock Re: [Amps] MOVs, Vic Rosenthal K2VCO Re: [Amps] MOVs, Carl Re: [Amps] MOVs, Jim Brown Re: [Amps] MOVs, Roger (K8RI) Re: [Amps] MOVs, Carl Re: [Amps] MOVs, Roger Message not available Re: [Amps] MOVs, Jim Brown <= Re: [Amps] MOVs, Saandy Re: [Amps] MOVs, Roger (K8RI) Re: [Amps] MOVs, Michael Tope Re: [Amps] MOVs, Jim Brown [Amps] MOVs, Jim Thomson [Amps] MOVs, John Lyles Re: [Amps] MOVs, Roger Re: [Amps] MOVs, Manfred Mornhinweg [Amps] MOVs, Dave Hartman [Amps] MOVs, Jim Thomson

Previous by Date:	Re: [Amps] Another eBay Goodie, Richard Solomon
Next by Date:	Re: [Amps] MOVs, Jim Brown
Previous by Thread:	Re: [Amps] MOVs, Roger
Next by Thread:	Re: [Amps] MOVs, Saandy
Indexes:	[Date] [Thread] [Top] [All Lists]