Re: [Amps] Is this relay suitable for 1kw+ RF?

["qrv@kd4e.com" <qrv@kd4e.com>]

I should clarify ... this is for a wired connection ... to bring
the 160/80m coils in and out of the circuit:

http://www.ad5x.com/images/Articles/Match43footerRevA.pdf

I think that his original design used a single 3PDT relay - but I
may have misread it - this version is said to be an update of the
original.

David KD4E

> Or these
> http://www.surplussales.com/Relays/rfcoaxialrelays/rfcoax_uhf.html
>
>
>
> On Thu, Apr 17, 2014 at 3:49 PM, Drax Felton <draxfelton@gmail.com
> <mailto:draxfelton@gmail.com>> wrote:
>
>     Nope.  You need something like this:
>     http://www.rfparts.com/relays/relays-coaxrelays/6350-6.html
>
>
>
>     On Thu, Apr 17, 2014 at 3:04 PM, qrv@kd4e.com <mailto:qrv@kd4e.com>
>     <qrv@kd4e.com <mailto:qrv@kd4e.com>> wrote:
>
>         I recently acquired one of these 3PDT relays:
>
>         
> http://www.ebay.com/itm/Leach-__Relay-Model-1177-CBF-115-Volt-__50-60-Cycles-Coil-374-New-Old-__Stock-/121209541061
>         
> <http://www.ebay.com/itm/Leach-Relay-Model-1177-CBF-115-Volt-50-60-Cycles-Coil-374-New-Old-Stock-/121209541061>
>
>         I have an application to cold-switch sections of coil inline with
>         my 43' ZeroFive vertical to help with tuning on 160 + 80m.
>
>         Anyone know if this relay would be suitable to the task at full
>         legal ... or for that matter for RF in that application at all?
>
>         Thanks ... David KD4E
>

--

David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps