On 6/13/2016 6:03 PM, Jerry wrote:
The TX and RX pin diodes have been remarkably reliable with infrequent
failure.
I'll stick with my statement that pin diodes were / are the Achilles
Heel of all the Alpha Amps that used them, especially the 86. If they
were so reliable, why did Alpha design & build a replacement T/R board
for the 86 that used vacuum relay switching? Why did 86 owners buy
EVERY ONE that Alpha made? They were not cheap, about $450 each.
The pair of those Tx pins could handle about 20 watts of reflected
power. My 86 trips at about 2:1 SWR. Do the math. At the legal limit,
that's WAY more than 20 watts of reflected power. P-O-O-F!
73,
Bob
N2OAM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|