------------ ORIGINAL MESSAGE ------------(may be snipped)
On Tue, 1 Nov 2016 18:26:15 -0400, Mike wrote:
> You can test the meter with a ohm meter. Disconnect one side and check for
> continuity. Mike
Be careful with this. Some older ohm meters use very high current and
can damage sensitive meter movements.
If you have any doubts, measure the current through the ohm meter
probes first and be sure it is less than the full scale of the meter
you want to measure.
Don't ask how I found this out years ago. :-)
73, Bill W6WRT
Amps mailing list