|Subject:||Re: [Amps] Single Band Amplifiers One Power Supply|
|From:||Steve Wright <email@example.com>|
|Date:||Thu, 1 Dec 2016 14:21:40 +1300|
On 01/12/16 07:35, firstname.lastname@example.org wrote:
In modern amps. both the B- and B+ are NOT connected to ground, but left floating. The grid current meter is connected from B- to ground.
Can the IP not be metered with a modern magnetic DC current sensor, directly in the anode line? That would at first glance dodge all the metering and PSU complexity.
I accept the safety reasons IP has been traditionally metered, but why can that not be metered directly now with new methods?
Steve _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [Amps] SPE 2K - noisy exhaust fans, Joe Giacobello, K2XX via Amps|
|Next by Date:||Re: [Amps] Single Band Amplifiers One Power Supply, Bill Turner|
|Previous by Thread:||Re: [Amps] FW: Single Band Amplifiers One Power Supply, Bill Turner|
|Next by Thread:||Re: [Amps] Single Band Amplifiers One Power Supply, Bill Turner|
|Indexes:||[Date] [Thread] [Top] [All Lists]|