Date: Sun, 4 Dec 2016 09:56:48 -0500
From: "Paul Christensen" <w9ac@arrl.net>
To: <amps@contesting.com>
Subject: Re: [Amps] Alpha 9500 vs. Acom 2000A questions
Correction. The IMD improvement is closer to 20-25 dB for vacuum tube
amplifiers.
http://www.n3sh.org/Tech%20Section/PureSignal_final_selection.pdf
>"NR0V's pre-distortion algorithm can clean-up most any dirty amp by 10-15
dB when the amp is included in the correction loop."
Paul, W9AC
## On page 39 of the above power point presentation...it sez...
... Probably difficult for modes such as SSB and AM....
## Does this concept work on ssb or not ?? It appears all the various
tests were done using a steady state 2 tone signal.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|