Amps
[Top] [All Lists]

Re: [Amps] HV MOSFETs for RF

To: amps@contesting.com
Subject: Re: [Amps] HV MOSFETs for RF
From: Manfred Mornhinweg <manfred@ludens.cl>
Date: Fri, 12 May 2017 02:09:05 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Cathy,

What is that flaw in most 100W radios, Manfred?
It's the lack of coupling between the two sides (the two drains, or 
collectors) of the push-pull stage.
In linear class AB or B push-pull stages the two sides need to be very 
tightly coupled. Most of today's 12V 100W final stages don't provide any 
of that coupling at all, and the few that do, achieve a good degree of 
coupling only on the lowest bands.
And I'm not blaming the designers, in cases where they have no choice 
but to use 12V supplies - I don't know myself how to achieve that 
coupling, when the impedances are as low as 1.5 ohm per side. But the 
logical reaction should be to reduce the difficulty by moving to a 
higher impedance, which means a higher supply voltage. And then design 
that coupling into the circuit!
Manfred

========================
Visit my hobby homepage!
http://ludens.cl
========================
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>