Amps
[Top] [All Lists]

Re: [Amps] NXP 65V LDMOS 1K80H-1800W

To: Amps group <amps@contesting.com>
Subject: Re: [Amps] NXP 65V LDMOS 1K80H-1800W
From: Paul Baldock <paul@paulbaldock.com>
Date: Sun, 24 Dec 2017 15:23:28 -0800
List-post: <mailto:amps@contesting.com>
It's a pity no one makes an auto tune 2 x 3-500Z with 6M.

- Paul

At 03:16 PM 12/24/2017, you wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)

On Sun, 24 Dec 2017 08:49:23 -0800, Jim wrote:

>## I would like to see what both these amp manufacturers have to say about duty cycle. >If they are 1.5 kw ICAS, I will pass on em for now, not for the $7K price tag.

REPLY:

Before anyone gets too enraptured over SS amps, you might want to
reconsider the advantages of tube type amps:

1.  With a pi or pi-L tank, no antenna tuner is required up to SWR of
about 3:1.

2.  Likewise, no low pass filters.

3.  Much more resistant to accidental overloads.

4.  Heat dissipation is easy.

5.  Usually cost less unless you want autotune.

6.  1.5 kW CCS is easily achievable, i.e. a single 8877 pr pair of
3-500Z's. The most common limiting factor is the power supply, not the
tube.

Drawbacks:

1.  Warm up time with some tubes. Not an issue with 3-500Z's or other
filament-type tubes.

2.  The cheaper ones are all manual tune.

You pays your money and takes your choice.

73, Bill W6WRT


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>