Hello everyone,
On this page,
http://lpistor.chez-alice.fr/pairf510.htm
I found a MOSFET amp description that does not need an output
transformer. The author says that the output impedance of the
transistors is 48 Ohms and that a balun is enough.
How can this amplifier have such a high output impedance?
And most importantly, if the output impedance is 48 Ohms and the supply
voltage is 13.8V, then how can the output power be 5-6 W?
If the formula V ** 2 / R is used, that is 13.8 * 13.8 / 48, the output
power should be less than 4 W.
Best regards
Angel Vilaseca HB9SLV
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|