[Amps] Henry 3K-A choke failure...workaround?

[jeff millar <wa1hco@gmail.com>]

Hello wise ones...

Bought a nice 3K-A at a flea market and made one SSB contact.  On the
second contact it tripped off on HV overcurrent.  After some debugging, the
Plate choke is leaky to ground at HV but open with an Ohm meter.

Can I just put the choke up on insulated standoffs?

Any other suggestions?

thanks,

jeff, wa1hco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps