Suck it and see.
In my experience, different amps play differently on these bands. For
example, one amp will do 12m better in the 10m position, whereas with
the other, it plays better when set to 15m.
I have not had any experience with your model amp.
Good luck and 73,
Alek VK6APK.
On 13/12/2019 2:52 PM, Matt wrote:
I believe it's typically 10m for 12m and 15m for 17m.
73
Matt
KM5VI
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Douglas Zwiebel
Sent: Thursday, December 12, 2019 6:11 PM
To: amps@contesting.com
Subject: [Amps] Rookie question: TT Centurion amp
I have (4th owner) a Ten Tec Centurion amp.
The manual addendum shows the load/tun approx positions for 12, 17, and 30m,
but it doesn't say what "band" I should set the band switch to.
Does 12m go to 10 or 15?
Does 17 go to 15 or 20?
Does 30 go to 20 or 40?
Any help?
thanks
Doug
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
From sunny Binningup
Family Businesses:
SP Electrical. www.spelectrical.net.au
The Velvet Fox. https://www.facebook.com/TheVelvetFox/
Smart Design Electrical. https://www.facebook.com/smartdesignelectrical/
Perth Interiors. https://www.instagram.com/perthinteriors/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|