----- Original Message -----
From: <PaulKB8N@aol.com>
To: <CQ-Contest@contesting.com>
Sent: Tuesday, March 04, 2008 7:39 PM
Subject: [CQ-Contest] Help for pull-up resistors
> Sorry, this is a bit off topic, but I can't find anything
> in the K-3
> archives on this.
>
> I've have a new K3 coming in tomorrow and want to do
> antenna switching via
> the band-data outputs.
>
> I've purchased the W9XT band decoders but cannot ascertain
> how to wire the
> "pull up resistors" to the W9XT card inputs. How are they
> wired, in series?
> What kind of voltage is applied and where? What resistor
> value is
> recommended?
>
> Anyone who can help out there? Sorry for the bandwidth,
> guys! Just want to
> get everything up and running as soon as possible.
>
> Thanks,
>
> Paul, K5AF
You need four 10k resistors. Tie one end of all four
together to the terminal +12VDC.
At the other end of the resistors, one of each goes to input
terminals ABCD, tied to the wires coming from the K3.
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|