CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Skimmer reverse beacon experiment - update

To: "'Pete Smith'" <n4zr@contesting.com>, <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] Skimmer reverse beacon experiment - update
From: "Bill Parry" <bparry@rgv.rr.com>
Date: Sat, 8 Mar 2008 06:59:04 -0600
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Pete, Can this be fed into a regular packet cluster?

Bill, W5VX

-----Original Message-----
From: cq-contest-bounces@contesting.com
[mailto:cq-contest-bounces@contesting.com] On Behalf Of Pete Smith
Sent: Friday, March 07, 2008 8:37 PM
To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Skimmer reverse beacon experiment - update

Hi Clive - the spots I'm making available on the Internet are generated by 
a US$13 (that's right, $13, in kit form) 20M SoftRock SDR taking its 
antenna feed from the RX antenna loop of my second radio, a TS-930.  I have 
been feeding these spots directly into N1MM Logger and DX4WIN, simply by 
connecting to Skimmer as if it were a DX cluster node.

There are a number of radios on the market today (K3, Orions, etc.) and 
previously marketed (TS-940, TS-950, TS-850(?), etc. that have an IF tap on 
the antenna side of the roofing filter.  Neither of my radios has this 
built in, so I elected to go with the SoftRock for experimental 
purposes.  To tap the IF, you would need the appropriate SoftRock, or a 
much more sophisticated device like N8LP's forthcoming LP-PAN.

Either way, the potential is fantastic.

73, Pete N4ZR

At 07:03 PM 3/7/2008, Clive Whelan wrote:
>Pete
>
>Sure, fantastic software indeed, and you are demonstrating what it is
>capable of. Perhaps the most profound implication is that it can render
>the use of DX clusters irrelevant, and therefore - at a stroke- deprive
>the cheats of their ( currently enjoyed) edge. However , what I don't
>quite see is how the average Joe, or even the well equipped contest
>station can integrate the functionality into his favourite logging
>programme so that the "spots" populate the band map, until or unless
>add-on hardware becomes available, or manufacturers make a ca. 100kHz
>slice of the IF available to Skimmer. My 756PROIII clearly has that
>potential as it can already display a bandscope over such a range, but I
>don't see ICOM making that externally available any time soon, as it is
>simply not for the mass market.
>
>
>Am I lacking in vision, or do you share my reservations?
>
>
>73
>
>
>
>Clive
>GW3NJW
>
>
>Pete Smith wrote:
> > Today I replaced the Skimmer software with a new version that permits
you
> > to select whether to forward all spots to Telnet, or just the ones that 
> the
> > software identifies as calling CQ.  Depending on circumstances, you
might
> > want either.  Thanks to Alex for being so accommodating to this
experiment
> >
> > For the last several hours it has only been spotting stations that it
has
> > identified as CQ-ing or otherwise being ready to receive calls.  It has
a
> > series of key phrases it looks for, including some that are specifically
> > relevant to contesting, like [callsign] TEST or [callsign]SS.  In "spot
> > everything mode, it reports every station it hears - you can imagine how
> > useful this would be for a DXpedition station managing a big pileup.
> >
> > As you can tell, I'm sold - but please note, I have no business
connection
> > with VE3NEA other than as an admiring user of his products.
> >
> > 73, Pete N4ZR
> >
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
> >
> >
>_______________________________________________
>CQ-Contest mailing list
>CQ-Contest@contesting.com
>http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>