The ARRL CAC's decision on the use of CW Skimmer has an interesting
nuance. Skimmers on-site may be used by SO Unlimited and Multi-Op
contesters, but Skimmers situated outside the 500-meter-diameter
station circle may also be used by SO Unlimited and Multi-Op
competitors, so long as "a closed or dedicated communication link" is
not used, and on the understanding that the remote Skimmer cannot be
configured or controlled so as to benefit any one user or group of
users over any other (my interpretation, nothing official here...)
This is not intended to lead to a debate about the rule change -
honest! But it is a matter of practical reality. Some local clubs
have already set up Skimmers for their members to use during recent
contests, evoking memories for some of us of the 2-meter voice
spotting nets of many years past. Some multi-ops are contemplating
the establishment of nearby but off-site Skimmers, to avoid problems
with interference from their own transmitters. Some individual SOU
operators are thinking about setting up remote Skimmers (at a
mountain cabin, for example).
The question is, how can these plans be made to conform to the letter
and spirit of the CAC decision. Does simply deploying the remote
Skimmer on a publicly-accessible IP address meet the intent of the
CAC? Or does the IP address have to be publicized, in some
more-or-less widely-distributed way?
Enter the Reverse Beacon Network (RBN) <http://reversebeacon.net>.
Skimmers sending spots to the Reverse Beacon Network can now have
their IP address publicized on the RBN site, and have links to them
displayed there. That would certainly meet the CAC requirement of
not being "closed or dedicated" communication links. Besides,
imagine the potential of 20 to 50 reverse beacons, closely co-located
with major contest stations or clubs, all reporting what they hear
and storing it for analysis after the contest.
This is strictly a hypothetical example, but suppose HC8N or DA0HQ
set up a remote Skimmer and forwarded spots to the RBN during the WPX
CW Contest this May. Each spot posted by the Skimmer would include
the station's signal-to-noise ratio. Then, after the contest,
competitors from around the world could compare their signals with
one another *as heard at ..."
Adding the RBN to the configuration of a remote Skimmer would be
trivially easy. Install and run the RBN Aggregator software (a
simple 2-minute download and install) alongside CW Skimmer. That's
all it takes. Set it up in a batch file so that if anything knocks
your Skimmer off the air, you can restart easily. Voila - you're
unquestionably legal, and you'll also be contributing to a databank
that will be a lot of fun to revisit after the contest.
To download the Aggregator, visit
Download the zipfile with the .exe and its companion .dll file, and
put them in your CW Skimmer program directory. Start Skimmer,
start the Aggregator, and you're a contributor to the Reverse Beacon
Network. It really couldn't be much easier.
I'll be glad to answer questions and discuss this off the reflector,
or on firstname.lastname@example.org. Thanks for reading.
73, Pete N4ZR
the World Contest Station Database is back, and updated daily at
Visit the Reverse Beacon Network at http://reversebeacon.net
CQ-Contest mailing list