K3NA did some sophisticated studies a decade or so agoof the K4JA
multi-tower station, for NCJ. You might be able to find those, Timon,
or get in touch with him.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 8/24/2014 9:40 PM, David Siddall wrote:
Hi Timon,
With multiple towers available, I would keep my 40 meter antennas off any
tower with 15 meter antennas -- whether monobander 15's or tribanders. Too
often 40's disrupt the pattern of the 15's. It seems to be very antenna-
and spacing- specific, and I am not 100% confidant in modeling for this
issue.
GL es 73,
Dave K3ZJ
On Sun, Aug 24, 2014 at 5:25 PM, Timon Kruijer <Pa1t@xs4all.nl> wrote:
Hello fellow contesters.
I have an antenna setup question.
This year (and the next) I am building a new HF station. Next to the house
I
will have four rotary towers standing in a square which are 40 meters
apart.
The towers are rotatable and are 25m (83 feet) high from the ground. Every
tower will also have a rotor in the top with a 2 meter mast so in total 27
meters (90 feet). The towers have rings on 24 meters and on 11 meters (not
fixed yet) as they are still lying on the ground.
To rotate and calculate the directions for each tower and the top antenna I
use Microham Station Master de Luxe.
My goal is to have a competitive contest station for SO2R, Multi Singe and
Multi-2 use.
What would be a good suggestion for the antennas in the four towers?
The terrain is flat.
The antennas I have available at the moment are:
- 2 el Force 12 40 meters
- 4 el Steppir 10-15-20 meters
- Optibeam 10 15 20 meters
- Force 12 c31xr 10 15 20 meters
My idea so far is to use these 4 antennas for multipliers etc.
I would like to have additional 2 antenna stacks for 20, 15, and 10 meters
(which I have to build).
A possible setup could be:
Rotatable Tower 1
top rotatable, Steppir
bolted at the tower 20 meter yagi
bolted at the tower 20 meter yagi
Rotatable Tower 2
top rotatable, c31xr
bolted at the tower 15 meter yagi
bolted at the tower 15 meter yagi
Rotatable Tower 3
top rotatable, 2el 40m
bolted at the tower 10 meter yagi
bolted at the tower 10 meter yagi
Rotatable Tower 4
top rotatable, 3 el 40m
bolted at the tower optibeam 10 15 20M
bolted at the tower 3 el 40m
Or setup 1 multiplier tower and use the others for 10 to 40 meters. Which
band to have a double set antennas when this would be a solution?
For 40 and 80 meters I will have additional 4 squares behind these towers.
Also possible would be to have wire 4 squares hanging on ropes between the
towers (between the top rings on 24 meters).
For 160 meters the towers can be a 4 square by itself (they are isolated).
Also the ropes could be again for a 160 meter antenna.
Suggestions and comments are very welcome. Please your ideas.
'73 Timon
PA1T
Home page www.pa1t.com
Tel 31 (0)598416308
Cell phone 31 (0)657545506
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|