CT-User
[Top] [All Lists]

[ct-user] ?CT & IC706IIG still not talking

To: <ct-user@contesting.com>
Subject: [ct-user] ?CT & IC706IIG still not talking
From: Tony <ad6id@arrl.net> (Tony)
Date: Wed, 20 Jun 2001 17:57:43 -0700
Hello yet again,

   I am running CT963 under DOS on a Toshiba Portege 7100 with the CI-V 
connection on COM1. I cannot get any communication using CT running under DOS. 
I t_e_s_t comm by typing a frequency at the CT prompt and by switching bands on 
the rig. The error from CT963 is _still_ "radio not echoing". 

However, I verified the port and the radio settings using TRX-Manager 3 running 
under Win98. Both directions work - the computer to rig, rig to computer.

Here are the IC706IIG settings:
34 CI-V Address  04H  (IC735)              also tried 26H for 781
35 CI-V Baud     Auto                      also tried 4800
36 CI-V TRN      On   (broadcast)
37 CI-V 731      ON   (4 byte freq data)   also tried Off (5byte)

Here's the ct.bat file I'm using:

SET TZ=PDT7:00
font SS
comtsr1 -P1 -B4800 -N81
ct -d %1 %2 %3 %4 %5
comtsr1 -u
font O

CT also calls out RADIO1 as COM1 4800. 

I find nothing in the Icom manual for parity/startstop bits so I have them set 
for no parity, 4800 baud, 1 stop bit. I also tried 2 stop bits.


What arcane piece of the puzzle am I missing?


Thanks,  Tony

Tony Armendariz, AD6ID
ad6id@arrl.net
FISTS 3535   WPSS  ARRL 


--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] ?CT & IC706IIG still not talking, Tony <=