On Sun, Jan 11, 2009 at 4:06 PM, Ed K1EP <k1ep.list@gmail.com> wrote:
>
>
> >2. When I use Alt-F1 in CT to change bands, it QSYs my 850 but
> >always to the low end of the band. IE, if I'm on 14.040 and ALT-F1
> >to go to 40M, it sends the 850 to 7.000 vs. whatever the last freq I
> >used on 40 was. Also, changing bands on the 850 does *not* cause CT
> >to change bands in the logging screen. I don't remember it working
> >this way when I had older DOS version of CT interfaced to my 850 -
> >or is that just how it works.
>
> Can't remember either. I usually just type in the freq I want to go to.
>
I thought that it would go to the bottom of the band the first time you went
to
that band. But it would remember what freq you were on the second, and
successive times that you go to that band.
Don't have an 850 so I'm not sure on that part.
73 Hank K8DD
--
"I knew that God put me on this earth to be on the radio." Ed Bradley
--
"Me too!" K8DD
--
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|