Thanks to all the guys for all the answers...
Seems that for my purposes, it's a whole lot easier than I thought.
73 and thanks again.
Tom K5IID
Cortland Richmond <ka5s@earthlink.net> wrote:
GOOD topic!
I like Tom's approach myself; it's easy to do. Some of the folks I've worked
with (and for) require more. And the impedance in a fixture is not a CERTAIN
predictor of performance on a wire; I've demonstrated this on occasion, where
beads had to be moved to a higher-current part of a wire a quarter wavelength
further away.
Cortland
-----Original Message-----
From: Tom Rauch
Sent: Aug 15, 2004 3:15 AM
You don't need to know the manufacturer OR the mix, all you need to know is the
impedance.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
Tom Horton K5IID
Hillsboro, TX
USA-CA All Counties 661---DXCC---5 BAND DXCC
WPX HONOR ROLL---5 BAND WAC---WAZ
Finally back home in Texas after all these years!
"E" sorter for the ARRL W5 QSL bureau
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|