RFI
[Top] [All Lists]

Re: [RFI] Part 15 Class B labeling requirements

To: rfi@contesting.com
Subject: Re: [RFI] Part 15 Class B labeling requirements
From: "Cortland Richmond" <ka5s@earthlink.net>
Reply-to: ka5s@earthlink.net
Date: Fri, 22 Apr 2005 20:49:57 -0700
List-post: <mailto:rfi@contesting.com>
The Part 15 labelling on Amateur transceivers is required because receivers
covering 30-960 MHz must comply with provisions of Part 15 adn no other
label is provided. The notice does not apply to the transmitter and we do
NOT have to accept the interference an unlicensed Part 15 intentional or
unintentional radiator does.

Cortland
KA5S


> [Original Message]
> From: Martin, AA6E <martin.ewing@gmail.com>
>
> So I just purchased a shiny new Icom 208H transceiver.  The
> instruction manual has the same "This device complies with..." message
> on it.   How come a 2M/70 CM rig "may not cause harmful interference"
> and "must accept any interference"?


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>