RFI
[Top] [All Lists]

Re: [RFI] FW: Interference on TV using 2 meters

To: "RFI List" <rfi@contesting.com>
Subject: Re: [RFI] FW: Interference on TV using 2 meters
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Sat, 28 Oct 2006 12:55:18 -0700
List-post: <mailto:rfi@contesting.com>
On Sat, 28 Oct 2006 10:33:41 -0600, Tim wrote:

>There was a ham in our area that was so negative about cable that he set up
>his packet bbs station with a 300 watt 2 meter amp to reach a digi 1/2 mile
>from his home. Plus it was set up to beacon every 30 seconds.

While I certainly don't condone intentional QRM, when the cable system chose 
to convert TV to VHF frequencies allocated to other users, it assumed the 
responsibility for preventing QRM to and from licensed users (including 
listeners to licensed services). The decision to make that conversion was a 
calculated one based on cost and benefits. Sometimes the optimistic 
assumptions about cost (and the law of averages) catches up with that  
decision. 

If a ham is trying to do weak signal work near a leaky system, he might 
easily be limited by the sidebands from Ch 18. Luckily, if the vestigal 
sideband filters are working properly, there shouldn't be much in the 144-
144.4 MHz segment. 

I enjoyed your story re: the small town cop. A bit over a year ago, I got a 
similar "bums rush" from an audio company who was selling a digital power 
amp with LOTS of trash in the AM broadcast band and above. When I tried to 
be a nice guy and let them know the seriousness of their problem, the told 
me they didn't care, and told me to call the FCC. I did. They stopped 
selling the amp a month later. 

Jim Brown K9YC


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>