RFI
[Top] [All Lists]

Re: [RFI] [YCCC] Interference to CO Alarm

To: <rfi@contesting.com>, <yccc@yccc.org>
Subject: Re: [RFI] [YCCC] Interference to CO Alarm
From: "David Robbins K1TTT" <k1ttt@arrl.net>
Reply-to: k1ttt@arrl.net
Date: Mon, 6 Nov 2006 21:04:25 -0000
List-post: <mailto:rfi@contesting.com>
I have found that wrapping things like that tightly in aluminum foil stops
the problem.  However if it is one that is wired into the house electrical
system you may also need a few ferrites on the power line.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: yccc-bounces@yccc.org [mailto:yccc-bounces@yccc.org] On Behalf Of
> k2qmf@juno.com
> Sent: Monday, November 06, 2006 20:29
> To: rfi@contesting.com; yccc@yccc.org
> Cc: towertalk@contesting.com
> Subject: [YCCC] Interference to CO Alarm
> 
> Hello All,
> 
> I have an RF problem with my Kidde
> Carbon Monoxide Alarm.
> The alarm goes off when I am transmitting
> on 40 or 20 meters.
> 
> Any suggestions as how to filter the alarm?
> Any suggestions would be very much appreciated...
> 
> 73,
> Ted  K2QMF
> _______________________________________________
> YCCC Reflector mailto:yccc@yccc.org
> Yankee Clipper Contest Club  http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>