I have come upon a source of toroids 5/8" x 5/8" x 3/8"
thick.
They contain a 7/16" diameter powdered iron core
(Micrometals T44-52) wound with approximately 7 turns
of copper wire for a nominal inductance of 1.7 uH at
0 DC current.
They are marked with the part numbers; HM00-98502, BI 9839 M
Would these be useful as-is or rewound for dealing with
RF problems in the Shack or elsewhere?
Does the size or type indicate power handling capacity
and frequency relevance?
At 3 cents each they seemed worth asking about!
--
Thanks! & 73, doc, KD4E
Personal: http://bibleseven.com/kd4e.html
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|