Have a new flattop electric stove that at a KW on 15 meters - the alarm
beeper keeps going off. OK at 100 watts . Fine on all other bands - same
KT34 on 10 and 20 is OK at KW and INV vee even closer on 80 and 40 OK.
I want to try first just winding some of the pigtail leads on some F240 #31
cores . Question should I do it on all three wires or just the two "hots"
220 ?
I realize it may be some sort of direct radiation into the stove electronics
but I want to start this way .
73 Hank K7HP
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|