I would make sure you contact the manufacturer... the specs for that say it
passed fcc class a and b... which if it did pass means likely one of these:
1. defective equipment (maybe they left out a filter somewhere?)
2. defective installation (installer didn't follow instructions or installed it
outside the specified conditions or substituted improper materials)
Of course there is the possibility that their test conditions didn't properly
simulate a real world installation.
I have heard that one of the problems with the large inverters is radiation
from the dc cables... you might want to see if they recommend running them in
metallic conduit, or twisting them, or both.
Mar 20, 2012 02:23:40 PM, neil.goodell@myfairpoint.net wrote:
The inverter is a PV Powered PVP3500,
Here is a link to there website,
http://solarenergy.advanced-energy.com/en/PVP3500.html
And Dale, the installer is working on trying to remedy this...
but has not been able to cure the RFI yet.
The ham/owner is the one who found the EMI Filters,
and was going to have me install them just to get this fixed.
I'm still not finding a lot of feedback on these 2 filters,
Radius Power PN Price/Ea Lead Time
RP135-100-100-S $214.50 6-8 weeks
RP605-100-100-S $211.85 6-8 weeks
Again, thanks for everyone's feedback and help,and the links to some
great reading material..
73,
Neil
AE1P
On 3/20/2012 12:03 PM, Neil & Heather wrote:
> I'll find out tonite,and post to the list...
>
> Neil
> AE1P
>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|