On 06/24/2012 07:48 PM, KD7JYK DM09 wrote:
>> "I am all too often identifying adjacent pairs of poles as "noisy". This
>> doesn't feel right to me.
>
> Try more attenuation. I have noted the same problem and can increase the
> attenaution in my system to where I have to be within 1" (one) of the ground
> wire of an offending pole to hear the noise generated by equipment on top.
Interesting, Kurt.
Oddly this is happening even on weaker noises that only move the
MFJ-856 meter to half scale or less.
I was fully expecting to find noise radiating from ground and guy
wires! But so far I always get more noise when pointing toward the
stuff on top of a pole than when holding the antenna nearly touching
a ground or guy wire. With some of the really strong noises I can't
determine this, and in those cases I probably do need more attenuation.
Paul
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|