Once when I had access to the TV, I tried one of those outlet strips with
filtering and it made no difference. I would have liked to spend a couple
hours troubleshooting his house, but I felt too much like imposing on them. I
kind of have the same feeling about the stuff radiating over the power line and
the cable TV coax. Again it takes time to work around this by disconnecting
and checking etc. It would be ideal if just me and Steve the household head
were there alone and had the time I'm sure he wouldn't mind, but the whole
family is around when they aren't working, so it's not easy. I would like to
try a better line filter on the TV. I don't have a lot of confidence in that
outlet strip filtering. And of course no cobbled up thing hanging off their TV
is acceptable, it would have to be very professional, like in a NEMA box with
the proper grounded outlets etc. I wouldn't want to have a fire started with
something unsafe. All these things have to be considered whe
n working with someone else's house and equipment.
73
Dale, k9vuj
On 25, Mar 2014, at 13:31, "Hare, Ed W1RFI" <w1rfi@arrl.org> wrote:
> Thanks, Dale.
>
> We can then see if the TV is still in production. If it is no longer
> manufacturered, it may be a harmful interference complaint, not a possible
> emissions-limit violation.
>
> The ARRL Lab would also be willing to provide a few filters to try, if your
> neighbor is willing to work with you. Some have speculated that the noise
> comes directly from the TV, and this could be true, but I still tend to think
> in terms of noise coming out the AC mains and possibly also being radiated by
> the shield of the incoming coaxial feed line.
>
> -----Original Message-----
> From: Dale J. [mailto:dj2001x@comcast.net]
> Sent: Tuesday, March 25, 2014 2:29 PM
> To: Hare, Ed W1RFI
> Cc: rfi@contesting.com
> Subject: Re: [RFI] ARRL to FCC...
>
> Ed
>
> I'll see if I can get that information from my neighbor, but it will take a
> while. I have to actually get in the house and look at the back of the TV
> and get the model number because I don't think they know for sure. As soon
> as I get it I'll send you a email.
>
> Tnx
> 73
> Dale, K9VUJ
>
>
> On 25, Mar 2014, at 13:04, "Hare, Ed W1RFI" <w1rfi@arrl.org> wrote:
>
>> If the ARRL Lab can get some reports involving specific model numbers, we
>> can do some testing and find out where these plasma sets stand. I had a
>> report in MD that involved two Samsung plasma TVs. One made very loud
>> radiated noise, while the 2nd model, also a plasma TV, was quiet.
>>
>> I need reports that involve a plasma TV operating in a neighbor's home
>> causing harmful interference. So far, most of the reports have been about
>> the QRZ.com and RFI list discussions, not a specific report.
>>
>> The ARRL Lab can measure conducted noise and radiated noise from devices,
>> but we really need to start with actual, non-general reports.
>>
>> Ed Hare, W1RFI
>> ARRL Lab
>>
>> -----Original Message-----
>> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of KD7JYK DM09
>> Sent: Friday, March 21, 2014 12:23 AM
>> To: rfi@contesting.com
>> Subject: Re: [RFI] ARRL to FCC...
>>
>> : Now if they would recall all the damn plasma TV's out there doing the same
>> : thing it would really tickle my butt cheeks...but, any such action is
>> : goodness!
>>
>> How mant times have you contacted the FCC regarding the interference to your
>> licensed service?
>>
>> Kurt
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|