On Mon,2/23/2015 6:20 AM, rrath@charter.net wrote:
I am building a small shop and thinking about lighting the place with LED tube
lights that fit
the T8 fluorescent lamp fixtures.
For the last year or so, the primary lighting for my shack has been four
of the smaller LED strips from the vendor on the link below. My strips
are older and smaller than those listed here, and appear to be
discontinued, but the newer larger ones are even nicer. Mine run from
12VDC, and the combination draws about 1.2A from the 12V battery bus
that runs everything in my shack except the power amps. I found them in
a booth at the Pacificon and Visalia ham conventions.
https://www.wiredco.com/LED_Lighting_Low_Voltage_s/1874.htm
For a shop, you would want a lot more light than my small system, but
the beauty of a system like this is that the usual noise source for LED
lighting, the power supply, is entirely within your control.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|