Jim:
I get the distinction between a lightning ground and an RF ground. In
the case of an end-fed wire (that would be me) where a small portion of
the antenna comes right into the shack, that seems the likely source of
my ills (since the problem does not occur on all bands).
What am I missing here? Every schematic I've seen of an end-fed wire
shows a ground symbol at the tuner. As all my equipment chassis are
connected (perhaps not "bonded") to a thick ground wire - that means the
tuner is as well.
Jerry
KI4IO
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|