It won't. If you put a transmitter inside a screen room with an
external antenna, it will radiate.
Tom W0IVJ
On 10/6/2018 1:59 PM, Tony wrote:
All:
The RF Engineers from Solar Edger came out to my home this week to
assess the noise emanating from my neighbors solar panel system.
They plugged into my antennas to view the spectral noise on my
receiver which they then compared to the spectral noise that appeared
on their portable setup near the solar panels. They determined the
noise to be one and the same.
The next course of action is to improve the ground system and install
RF absorbing foam to each optimizer. I also convinced them to replace
the snap-on ferrites located at each optimizer, with larger ones so
they can loop several turns of cable around each core.
They originally said they would just go with the RF foam which is
puzzling: I don't understand how encasing a noisy device with this
stuff could suppress RFI when the device is attached to long runs of
cable that act like antennas. Can anyone explain how that would work?
Tony -K2MO
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|