I recently installed a Fujitsu Halcyon split unit with dual zones with the
inverter technology. The compressor and both zones are in the garage and
directly below my 80m dipole. No detectable RFI. YMMV.
I only have resonant antennas up for 20/40/80/160, but I loaded the 80 on 10,
15 and 20m with no noise.
Regards , Kenny K2KW
> On Mar 8, 2021, at 12:54 PM, David Winarsky <david@winarsky.com> wrote:
>
> Hi folks,
>
> I’m in the final stages of building my new ham shack at a remote / tower
> location and need to decide on the heating and air conditioning. It’s a
> 10x12 shack with ~12 feet high ceilings, so it’s a small space, but it can
> get pretty hot up there in summer (sierra foothills of California). I only
> have ~30 amps total available so will also need something efficient.
>
> My contractor recommended a Fujitsu Mini-Split:
> https://www.fujitsugeneral.com/us/products/split/wall/12lzas.html
> <https://www.fujitsugeneral.com/us/products/split/wall/12lzas.html>
>
> Has anyone had any experience with these types of units?
>
> It seems to have a variable speed motor with “inverter technology” but the
> HVAC company says it can be placed in a specific mode (low, med, high) rather
> than auto where it will stay fixed.
>
> Appreciate anyone's feedback/experience with this or any alternate units to
> consider.
>
> Thanks,
> David K6ZD
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|