[Top] [All Lists]

Re: [SD-User] Load.LST

To: <>
Subject: Re: [SD-User] Load.LST
From: "Paul O'Kane" <>
Date: Wed, 18 Feb 2009 23:24:19 -0000
List-post: <">>
----- Original Message ----- 
From: "John Muzyka"

> I have gone into the call field and entered LOAD,

The LOAD command loads a .LST file of your choice.

> there appears underneath some text saying enter the LST
> file, so put in LOAD (no extention) and it then says
> loading the LST.

In this case, you are loading a file called LOAD.LST.
Is that what you want to do?

> My F2 is "#C #N #T #S BK#E

It works here on matching callsigns, with a .LST file
where the names are the first fields after the callsigns.
At the same time, the name (and any other data in the
.LST record for that callsign) appears below the 
callsign on the logging line.

BTW, there should be no space between the #C and #N,
as the space is programmed for #N.  Otherwise, with
the space, there will have a two-space gap between the
callsign and the 599 where there is no matching name.

Paul EI5DI
SD-User mailing list

<Prev in Thread] Current Thread [Next in Thread>