I spent a little more time tonight playing with different versions from
15.45 to
15.49 and it appears to start being a little flaky with version 15.46, I
believe.
Version 15.45 works well. When I bring the program up, it shows 80M, even
though it reads the actual frequency. When I log a QSO, it all changes
to the
correct band indicator, or if I manually change the band on the radio,
IC765.
Version 15.49, it is way off. It starts on 80M and does not show the
radio's
frequency. I do a QSO and it logged on 80M. If I do B20, it moves to 20M.
If I manually select, say 40M, nothing on SD changes. If I type 07028, the
radio changes to 7028, but SD still says 20M. I tried the 14027.88 and
that
works as it should. It seems to just not read my radio in versions 15.46
through 15.49, though it will control the radio. In .45, I see my
frequency
in yellow below the logging line. In .46 through .49, there is nothing.
I hope I described this accurately.
--
161, Joe, Ronnie(Rowena), Marty& Sidney Pontek
P.O. Box 280
Dangriga
Stann Creek District
Belize
(Hopkins Village)
011-501-503-7346 Belize
011-501-666-3564 Belize (cellular)
903-424-4267 (My cellular when in Texas)
V31JP K8JP VP5/K8JP VP5JP K8JP/VA2
k8jp@arrl.net
FOC 1743, CWops 876, A1OP
SKCC 3171T, FISTS 7625 CC 951
LotW
Skype: v31joepalooka
http://www.justanswer.com/lp-1eh8-tool-repair
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|