On 04/05/2014 20:45, Arne Gegerfelt wrote:
OK, found the following in the latest (17.35) SD.PDF
QSOPARTY: When Y, callsigns ending in /M or /R are not dupe-checked.
This covers the Dupe warning, also handles the different county correct.
Yes, that's the way SD is intended to work.
So it's just the case with W1AW/7 that is not covered, but the
AUD-file contains the following which then should give the complete
picture for editing the log file.
W1AW/7 599 599 NVWAS 5 002 Before
W1AW/7 599 599 NVCAR 5 002 After
W1AW/7 599 599 NVCAR 5 003 Before
W1AW/7 599 599 NVSTO 5 003 After
When the same callsign is logged with a different county,
and the callsign does not end in /M or /R (with QSOPARTY
set to Y), SD assumes you know what you are doing and
that the most recent exchange is the correct one for all
QSOs with that individual station.
That's why it changed the earlier QSOs - SD enforces
exchange consistency when dupe checking is enabled.
The workaround option is to add /M or /R while logging.
That lets you log different counties for the one station.
These suffixes can be removed from the Cabrillo log.
In the meantime, all the information needed to update
the Cabrillo log is recorded in the audit file.
This issue may not arise again for another 100 years
- ARRL's next centenary year :-)
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|